What is the automatic shaking of the advertising engraving machine?

The spindle of the advertising engraving machine is shaken, generally because the spindle speed of the advertising engraving machine is low, the chip speed is too fast, and the product density is high. Different materials, chip speed and spindle speed, as well as the overall rigidity of the organic table, performance has an impact.

What should I do if the advertising engraving machine starts to shake automatically?

When you find that there is a jitter condition, you only need to slow the feed rate a little bit to solve the problem.

1. Check if the spindle slider is loose.

2. Check if the spindle bearings are worn.

3. Check if the processing graphic is a small line segment.

4. Check if the level of the advertising engraving machine is adjusted. If it is not adjusted, adjust it.

5. Check if the gap of the spindle bearing of the advertising engraving machine is too large, and adjust it if it is too large.

6. Check if the speed of the advertising engraving machine is too high. If it is too high, adjust it.

7. Check whether the processed workpiece is asymmetrical, and whether the center of gravity coincides with the center of the advertising engraving machine.

8. Check if the gap of the guide rail of the advertising engraving machine is too large or the strength of the arbor is not enough (this possibility is not big).

The problem of automatic shaking of the advertising engraving machine is solved. Let us say that the advertising engraving machine is jagged?

1. First, see if you have just moved the position of the machine, resulting in the machine base not being fixed, causing the machine to vibrate during processing, causing the knife to follow the jitter and causing the engraved surface to be not smooth and jagged. After the customer moves the position of the engraving machine, the four corners of the machine must be fixed firmly.

2. Secondly, the engraving of the advertisement generally does not cause the knife to be sharp and the broken edge causes the engraved surface to be not smooth and jagged. It is found that the engraved surface is not smooth and has a jagged phenomenon. It should be checked whether the model size of the knives used is suitable. If the shank is extended too long, the knives will be deformed at the processing time, which will result in a machined surface. Not smooth and jagged.

3. There is also that the processing table and the engraving machine main shaft are not vertical. At this time, if the engraving machine performs the X-axis direction, the engraving surface will be not smooth and jagged. At this time, the spindle verticality needs to be re-adjusted. In this case, if the customer can't solve it, you can contact the Wei Tuo technician to help solve the problem.