The stone engraving machine is a kind of equipment that can be engraved on natural stone, glass and ceramics. It adopts the form of fully automatic computer control with high precision and good use efficiency. However, in the process of operating the equipment, there are actually many things to consider. Here we will take a look at the basic operating instructions and steps of the engraving machine.
Before using the stone engraving machine, make sure that the connection between the machine and the computer is normal. Make sure that the connection is normal before you can turn on the power and start the system. The operation engraving machine is more exquisite, and it has requirements for the operators' own technical strength and operation ability. Before the operation and processing, the corresponding processing program must be input. According to different processing requirements, the procedures will be different. When considering the specific processing conditions, enter the corresponding program operation instructions, then open the drive where the file is located and the path, etc., start loading into the system.
So how does the general engraving machine work? After determining the working origin of the engraving machine, the two X and Y directions of the engraving machine should be manually moved to the desired origin position on the workpiece, and then the program is switched, set to "the current point is set to the working origin", or Directly change the current position of the coordinate window to zero, so that you can directly return to the original position for processing.
The types of engraving machine equipment that stone engraving machine manufacturers can provide today are more choices. It is necessary to consider the selection of suitable equipment according to their own processing needs and processing difficulty, so as to improve the production and processing efficiency.
