1. For the friends who make carpenter carving machines, the most important point is to judge a reasonable cutting amount according to the hardness of the carving data and the function of the stone carving tool, which is what we usually call the depth of each layer.
2. We can also carry out roughing and then finish machining according to the actual situation. When roughing, we should cut off all the margins as much as possible to save the finishing time; we can also select the tool data with better machining function. The function of the stone carving machine is not only reflected in the hardware and equipment of the machine, but also requires us to pile up the processing experience little by little and improve the processing power.
3, each tool of the tool will have a maximum amount of knife, when we use the carpenter carving machine for processing, try not to use the maximum amount of tool to process the tool, long-term processing, the tool damage is faster. Moreover, the speed can not be improved when the maximum amount of knife is processed, and the speed is likely to form a broken knife.
Therefore, it is better to set the amount of the lower knife to 2/3 of the maximum amount, so that the tool life will be greatly increased, and the processing speed can be improved a lot; thus, the tool cost can be saved, and the processing power can be improved.
