The difference between the four-process cutting machine and the machining center

The difference between the four-process cutting machine and the carpenter processing center Many customers are doing the cabinet opening machine is to buy the carpenter processing center is still to buy four processes (Jinan Zhongke Zhou Sili) according to their experience in CNC equipment, tell the carpenter machining center Where is the four-process feeder area?
The difference between the four-process cutting machine and the machining center
The difference between the four-process cutting machine and the machining center
Which model is better for the four-step cutting machine and the carpenter machining center? In fact, the two models have their own good and bad styles, the real difference is in terms of function and speed. In terms of machine quality and precision, the two models are the same, because the primary process for making plate furniture is due to high-speed cutting. Therefore, the plate-type furniture processing technology has very high requirements on the machine, so it is necessary for both models to be produced according to high equipment and strict machine installation process. For our factory, the multi-process cutting machine model and the double-process drilling machine are the same, the production process is the same, and the production is carried out according to the equal specifications. So what is the difference between the two models?
1. Processing scale: The four-step cutting machine can be used as both a door panel and a cabinet. The double-process drilling and cutting machine can only be used for the processing of panel furniture cabinets.
2. Processing speed: The processing speed of the double-process drill bag is better than the four-step process, because the drilling speed of the drill bag is much faster.
3. Machine cost: the double-process drill bag is made of Italian imported drills. The cost of the machine is higher than the four-process model.
4. The problem rate: Many customers think that the double process drill has a high rate of defects. It is considered that the structure of the drill bag is complicated. Once the machine is faulty, it will be difficult to repair, and the four-process machine will not affect the machine operation even if one spindle is broken.

Three ways to improve the efficiency of woodworking engraving machine

    1. For the friends who make carpenter carving machines, the most important point is to judge a reasonable cutting amount according to the hardness of the carving data and the function of the stone carving tool, which is what we usually call the depth of each layer.
 2. We can also carry out roughing and then finish machining according to the actual situation. When roughing, we should cut off all the margins as much as possible to save the finishing time; we can also select the tool data with better machining function. The function of the stone carving machine is not only reflected in the hardware and equipment of the machine, but also requires us to pile up the processing experience little by little and improve the processing power.
3, each tool of the tool will have a maximum amount of knife, when we use the carpenter carving machine for processing, try not to use the maximum amount of tool to process the tool, long-term processing, the tool damage is faster. Moreover, the speed can not be improved when the maximum amount of knife is processed, and the speed is likely to form a broken knife.
      Therefore, it is better to set the amount of the lower knife to 2/3 of the maximum amount, so that the tool life will be greatly increased, and the processing speed can be improved a lot; thus, the tool cost can be saved, and the processing power can be improved.